Carpenter Bags Loaded
Initial offering of our carpenter bags in the loaded version.
Loaded bags consist of:
2x base bags
1x padded 3" belt
1x harness (with one set of velcro attached pads)
2x nail/screw pouches(roughly 2"deep, 4"wide, 5"tall)
1x nail strip pouch (roughly 2"deep, 4"wide, 7"tall)
1x tape pouch (roughly 2"deep, 3.75"wide, 3"tall)
1x magnet bit pouch (roughly 1.5"deep, 3.75"wide, 3"tall)
1x tool pouch (roughly 2"deep, 9"wide, 5"tall)
Belt Sizing: Measure where you will want the belt to sit with an actual inch tape measure.  NOT your pant size. If you have trouble reading a tape have a smart coworker hold the smart end of the tape and read you the number. The belt has quite a bit of adjustment, but we want to put you into a properly sized belt the first time.
Like a few of our other items these will be made to order. That means if you order one, we are making it for you! We won't be correcting your mistakes! We are not twisting your arm here! We are pretty efficient and getting shit made quickly so expect a few days turn around but.....UNDERSTANDING, we are not fortune tellers here, and sometimes things take a bit longer.
In the near future, we will be offering each component separately so you can build your perfect set without being stuck with a full setup of my choosing.
Bags, pouches, belts, and harnesses are made from either Brookwood Squadron or Diversitex Salute Cordura laminates (color dependent). Pouches are attached via our Tegris Hinge and can be removed.
We utilize two different brands of Laminate Cordura, Brookwood Squadron and Diversitex Salute. As an FYI, the Salute is quite a bit stiffer, so if you order OG Tiger, Desert Tiger, DNC, and Nemesis, know your bags will feel stiffer than the Squadron initially. The squadron material, being slightly softer, may break in faster, but it is durable stuff! Diversitex is stiff, and they claim it will sag less over time... but we've tested both materials extensively and concluded they're both competent for carpentry/construction work.
We may also make design changes as we see fit. Design changes and material choice may change if we see a need or desire to do so
The D-ring Cobra buckle on the belt is NOT for life-saving purposes. Total looking cool points purpose only.
 The Carpenter's Belt is not intended to be, nor rated for use as, a fall restraint or arrest device. Do not use any part of the Shooters Belt as any safety tie-in point under any circumstances. Use a belt that has received the pertinent safety certifications for your use case
Lead Time Information
This product is hand-made in Stanwood, WA. Each order is sewn in the order they are received. For this reason, lead times can be 3-6 weeks. Your order will be assigned to one of our customer service team members, and they will stay in touch with you through the entire process!
Each base bag and pouch has a Tegris strip inside the folded mouth. It's bendable and keeps those pouch openings open! The base bags and pouch all have drain holes, strategically sized to fit 1 16p nail to fit, its gunna happen.
2x base bags
 Each of the base bage are built from a single piece of Laminate cordura lasered and folded/sewn to form the backbone of the base bag with an extrenal speed square pocket with hinge mounting interface, there is also a single front and rear pencil pocket as well as F/R tool hanger loops. The base bag back and bottom are doubled creating a rigid shell. Placement depends on right- or left-handed use; the base bags feature a double-layered laminate hammer and paw sleeve, with both having a tegris-stiffened opening.
1x padded 3" belt
 Laminate Cordura wrapping internal neoprene foam. Stiff yet comfortable. Austri Alpin D-ring cobra buckle with MIL-W-27265 T13 resin-treated 1-23/32 wide webbing OR Murdock jacquard woven webbing. There are 2 rear tabs for harness integration and 3 tabs on each side of the front ends for harness integration.
1x harness (with one set of velcro attached pads)
 The harness is made from one piece of Laminate Cordura with a second rear reinforcement piece of Laminate Cordura. The "shoulder straps" are fold-over laminated, creating a rounded, comfortable edge, and are lined with loop velcro on the underside for the removable foam pads. Each corner has 1" webbing and G-hooks to interface with the belt.
2x nail/screw pouches(roughly 2"deep, 4"wide, 5"tall)
 They hold nails, screws, and whatever! The rear doubled laminate backer of the pouch has two slots that can hold a pencil, nail set, etc.
1x nail strip pouch (roughly 2"deep, 4"wide, 7"tall)
 For strip nails for those who can't swing a hammer. The rear double-laminated backer of the pouch has 2 slots that can hold a pencil or other longish items.
1x tape pouch (roughly 2"deep, 3.75"wide, 3"tall)
 For those trusted with measuring things, it goes here. Also has two rear slots for skinny things.
1x magnet bit pouch (roughly 1.5"deep, 3.75"wide, 3"tall)
 Sorcery pouch. Has three rare-earth magnets on the rear of the pouch to hold stuff magically.
1x tool pouch (roughly 2"deep, 9"wide, 5"tall)
Manufacturer Information
Esstac is located in Stanwood, WA. All Esstac products are hand-made to order. They provide tactical equipment, including plate carriers, cummerbunds, clothing, and belts.
Warranty Information
Esstac products offer a limited LIFETIME warranty. Esstac warrants its products to be free from defects in materials and workmanship for the product’s lifetime. If a warranty claim is validated, they will repair, replace, or refund the product at their discretion. Contact us at Uprise Armory LLC to file a warranty claim.